+31 40 8080 193   +31 40 8080 193

Fiber Laser Metal Engraving Machine – LITE


The MetaQuip fiber laser LITE open metal engraving machine is MetaQuip's entry-level engraving and marking fiber laser. This machine is suitable for the engraving and marking of a large number of metals. No compromises on quality and supplied with industrial air filter and approved laser safety glasses. This is a laser class 4 product and comes complete with EzCAD laser software.

  • Laser engraving and marking: gold, silver, aluminum, iron, stainless steel and many other metals
  • Applications: creative industry, jewelers, industrial. Serial numbers, logos, barcodes, images
  • Laser power: 20W or 30W
  • Work surface: 100 x 100mm and optional lens for 70 x 70mm
  • Optional: laptop with laser software installed, rotation module

Delivered to you from 450 EURO, installed and including basic training (NL & BE).

    More information about our service contracts...

    Reset options
Or make a demonstration appointment...


Description   |   CE & laser safety   |   Included as standard   |   Specifications   |   Delivery, installation & training   |   Guarantee

The fiber laser metal engraving machine LITE is MetaQuip's open basic model for engraving metals, aluminum, mirrors and a number of plastics. Fiber laser engraving machines are used for laser engraving and laser marking of metal parts, jewelry, watches, mobile phones and so on. Think of placing part number, type number, logo, image, barcode or QR code.

Small but solid

The fiber laser metal engraving machine LITE has the same long life and reliability as MetaQuip's other fiber laser engraving machines. This small fiber laser machine is easy to place on a table or desk and makes little noise.

The MetaQuip fiber laser metal engraving machine LITE is a Open fiber laser (laser class 4) where the wearing of approved laser safety glasses is mandatory.

MetaQuip Fiber Laser Metal laser engraving machines
fiber laser metal engraving machine LITE
MetaQuip fiber laser metal engraving machine LITE


High Speed – Permanent Engraving

Engravings with fiber lasers are usually placed within seconds and are permanent: resistant to chemicals and remain legible even under mechanical stress.

High resolution and precision

The used 1064nm wavelength creates an extremely small laser spot that makes it possible to apply engravings and markings with high resolution. The wavelength of 1064nm is 10x smaller than the 10.6um of a CO2 laser. As a result, a fiber laser has a much smaller spot size than a CO2 laser, so that even the finest details can be engraved effortlessly with extremely high precision and resolution.

Applicable to the following metals

  • Silver
  • gold
  • Titanium
  • Stainless steel
  • Aluminum
  • Alloys
  • A large number of other metals

Completely delivered

The fiber laser metal engraving machine LITE is always supplied with an industrial air filter for direct extraction and filtering of released metal fumes, so that the operator is never exposed to these fumes. In addition, MetaQuip supplies approved laser glasses with this machine.

Laser power

The MetaQuip fiber laser metal engraving machine LITE is available with a laser power of 20 or 30 Watt.

Work surface

The MetaQuip fiber laser metal engraving machine LITE is supplied with a lens for a work surface of 100 x 100 mm. Optionally, there is a lens for a work surface of 70 x 70 mm, which makes it possible to achieve a higher engraving resolution.

Laser engraving medical instruments

Want to get a quote, demonstration or your own material? 

Would you like to know whether a fiber laser marking machine is suitable for engraving your material?
With some simple tests, we can quickly determine together what the best possible result is.

Features of the LITE Fiber Laser Metal Engraving Machine


The MetaQuip fiber laser LITE consists of:

  • Control box that also houses the laser source.
  • Optical fiber with which the laser source is connected to the fiber laser head.
  • Tripod with the laser head placed on it. With this tripod the correct focus length can be set (the distance between the lens and the workpiece).
  • The entire machine is controlled by a computer on which the laser software is installed. We can also optionally supply this computer.

The laser head contains an XY mirror that scans the surface at a high frequency. This XY mirror is completely closed off from the outside world and is the only moving part in this machine. This guarantees the high reliability and long life of this machine. More about fiber lasers on wiki

laser software

MetaQuip fiber lasers are easy to operate and control with the supplied laser software. With this software it is child's play to quickly engrave your workpiece.
With this software you can make your own design, enter text or import a vector design (logo) from other design packages such as Solidworks, Adobe Illustrator or other (vector) design programs.
The software supports importing of graphic image formats such as Coreldraw, AutoCAD, Photoshop and AI, PLT, PCX, DXF, BMP, SHX or TTF.
A Dutch manual is supplied with the laser software.

Course EzCAD

You can get an impression of the software and the possibilities by viewing the course below.

Industrial air filter

When working with fiber lasers, depending on the material to be engraved, toxic gases and small (metal) dust particles may be released. It is important for health not to inhale these! MetaQuip therefore supplies all its fiber laser engraving and marking machines including industrial air extraction. In addition to preventing possible health problems, the extraction also prevents these (electrically conductive) dust particles from contaminating your fiber laser, which extends the life of the machine.

Maintenance free

Fiber laser engraving and marking machines are virtually maintenance-free. In combination with the long service life and high engraving speed, these types of machines are extremely suitable for use in almost any working environment.

Laser marking aluminum type plate fiber laser engraving machine
Laser engraving of metal

Applications & materials

The Fiber Laser Metal Engraving Machine – LITE is widely used in the manufacturing industry for marking parts or products. Easy placement of logos, type numbers, QR and barcodes. We also see many applications in the creative industry, such as jewelers, but also for personalizing promotional gifts or smartphones.
Materials that can be engraved with a fiber laser engraving machine are all metals (such as stainless steel, iron, steel, metal, silver, gold, titanium, etc.) but also a number of plastics (such as ABS), mirrors and natural stone (slate, marble, granite ).
Go to the complete bill of materials ...





CE certification & laser safety

Open fiber laser machines, such as those on the Fiber Laser Metal Engraving Machine – LITE, are laser class 4 laser devices. This basically means that the operator and everyone in the same room is exposed to high power laser light. Extra protective measures must be taken for this, such as mandatory wearing of certified laser safety glasses to protect the eyes. MetaQuip only supplies laser safety glasses from renowned brands that meet European safety standards in all areas.

Open fiber laser engraving machines are supplied with a declaration of incorporation

However, this does not exclude that nobody can be exposed to laser light. To this end, additional laser safety measures must also be taken for the environment in which the open fiber laser is placed. Open fiber lasers by definition do not comply with the CE machine guidelines without these extra safety measures! MetaQuip can advise and support you in the implementation of necessary additional laser safety measures.

MetaQuip Fiber Laser Metal Engraving Machine – LITE

Included as standard

The MetaQuip Fiber Laser Metal Engraving Machine - LITE is supplied fully complete as standard. Delivery consists of the following parts:

  • Machine consisting of control box, tripod and high quality fiber head.
    Maximum height adjustment 700mm.
  • Lens for work surface of 100 x 100 mm (optional lens for work surface of 70 x 70 mm available)
  • Laser Software. Optional: computer with laser software installed
  • Laser Safety glasses suitable for class 4 fiber laser
  • Industrial air filter unit
  • Dutch or English language product & software manual


  • Rotation module: for engraving round objects
  • 70 x 70mm lens: for a work surface up to 70 x 70mm
  • Table: for placement of the fiber laser
  • Extra laser safety glasses: to protect the eyes of other people in the same room
  • Lightburn fiber laser software (Win, OSX, Linux): easy to operate software. Supports many image and vector formats. Also direct import of pdf files!

Technical specifications

Fiber Laser Metal Engraving Machine – LITE

  • Working area: 100 x 100mm. The working area can optionally be reduced to 70 x 70 mm.
  • Laser type: pulsed, high-energy Raycus laser
  • Wavelength laser: 1064 nm
  • Emergency stop switch: yes
  • Key on / off switch: yes
  • Repeat frequency: 20-100 kHz
  • Laser power: 20 Watt / 30 Watt
  • Laser output power: 0-100%
  • Minimum spot diameter: 0.01 mm
  • Minimum line width: 0.01 mm
  • Linear marking speed: 0-12000 mm / s
  • Character engraving speed:> 800 characters / sec
  • Repeatability +/- 0.001 mm
  • Marking depth: 0.01 - 1 mm
  • Cooling: air cooling
  • Supply voltage: 230 Vac +/- 10%, 50-60 Hz
  • Machine Power: <500 W
  • Working table: Z (0-700 mm) setting
  • Enclosure: open model, with control box (connection for foot pedal)
  • Control via own or optional supplied computer with laser software installed
  • Working temperature: 13-28 degrees Celsius
  • Ambient temperature: -40-70 degrees Celsius
  • Dutch-language product manual
  • Software: EzCad user-friendly software
    • Supported fonts: TrueType, SHX, JSF (Single line font), DMF (Dot Matrix Font), One-dimensional bar code, Two-dimensional bar code, etc.
    • Flexible variable text: changes the text in real time (such as numbering) while the laser is engraving. Link with Microsoft Excel files.
    • Direct reading of data via the serial port, and text data via the network
    • Draw simple figures and curves
    • Pictures formats: bmp, jpg, gif, tga, png, tif ...
    • Vector formats: ai, dxf, dst, plt ...
    • Simple IO operations to connect external equipment.
    • Dutch-language software manual
  • Laser safety glasses (more information or order extra glasses ...)
    • Optical Density:> 5 over the entire range
    • Optical Density:> 6 from 950 to 1070nm
    • CE certification: EN207 marking: 840-950 DIRM L5, 950-1070DM L5, IR L7 & 1070-1090 DIRM L5.
    • Visible light transmittance: 50%
  • Industrial air filter extraction: complies with ISO 15012-4: 2016

Delivery, installation & training

Inquire about current stock. If the MetaQuip Fiber Laser Metal Engraving Machine - LITE is not in stock, the delivery time is between 10-12 weeks. Faster is possible at additional costs (delivery time 5-8 weeks). This machine can be picked up (free of charge) or will be delivered for a fixed fee, installed on site and you will receive basic training on how to work with the machine.


2 year warranty on the laser machine (expected lifespan of the laser source is 50,000 to 100,000 hours, depending on use).

More information

Product Leaflet Fiber Engraver LITE-EN.pdf

Additional information

Laser Power

20W, 30W, 50W

You may also like…